CNCGLASS-PVB-Interlayers-for-Supertall-Facades

CNCGLASS-PVB-Interlayers-for-Supertall-Facades

This technical article sets out the performance a PVB interlayer must deliver in a supertall glass facade. It uses Wuhan Greenland Center, a roughly 475-meter tower with a large, highly varied curtain wall, as a reference for that duty, not as a project CNCGLASS supplied.

The piece explains why residual integrity after breakage matters at height: the laminated unit has to stay adhered through wind, vibration, thermal movement, and story drift, and keep fragments in the frame if a lite cracks. It also covers optical neutrality with low-iron glass, acoustic damping, and edge stability in a humid riverside climate.

Fabrication is treated as part of the same brief, because a wall made of tens of thousands of unique plates cannot tolerate a small-job defect rate. The article argues that the specification should be written to post-breakage integrity, optical neutrality, sound, moisture-aware edges, and process control, with architectural PVB as a central answer and ionoplast reserved where the engineer needs still higher stiffness after breakage.

Published by

cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com Whatsapp: 0086 15013829504 Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant