CNCGLASS-Thermal-Cutter-CNC02-Kit

CNCGLASS-Thermal-Cutter-CNC02-Kit

This photograph shows a CNCGLASS Thermal Cutter CNC02 kit. The orange handle is labelled “Air-cooling Thermal Cutter” and cnc@cncglass.com. CNC02 is designed for continuous working with an air-cooling system, and is used to trim overflowed EVA, PVB, or SGP interlayer remains from the edges of laminated glass. The tool heats up in seconds and is controlled with a 16-click temperature knob.

The CNC02 operating instruction rates the cutter at a maximum of 100 W, with a body length of 290 mm and a weight of 450 g. It is supplied for 230 V or 120 V, depending on the plug purchased, and the maximum temperature given in that instruction is 400 °C. The four blade types laid out in this kit are 14.2, 11.2, 4.2, and 3.2 — the blade types specified for CNC02. Enquiries can be sent to cnc@cncglass.com.

CNCGLASS-Thermal-Cutter-CNC02-Kit-and-Blades
CNCGLASS Thermal Cutter CNC02 with its toolbox, power cord, and blade types 14.2, 11.2, 4.2, and 3.2.

Published by

cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com Whatsapp: 0086 15013829504 Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant