CNCGLASS-Opaque-White-EVA-Laminated-Glass-Radiation-Heat-and-Humidity

CNCGLASS-Opaque-White-EVA-Laminated-Glass-Radiation-Heat-and-Humidity

This technical note covers an opaque white decorative EVA laminate from CNCGLASS: two 3.9 mm clear float plies bonded with a 0.38 mm opaque white EVA interlayer. Radiation, high-temperature and humidity resistance were evaluated to EN ISO 12543-4:2011, with luminous transmittance measured to EN 410:2011. Because the initial luminous transmittance was not more than 20 %, the absolute change is assessed: it was 1.0 % on each of the three specimens after 2000 h of radiation, within the ± 2 % allowance of EN ISO 12543-2:2011 point 5.3. No bubbles, delamination or cloudiness were observed after heat or humidity. The document is a CNCGLASS performance summary, not a third-party test certificate or certificate of conformity. This technical note does not list prices. Enquiries can be sent to cnc@cncglass.com. The full note is in the PDF below.

Published by

cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com Whatsapp: 0086 15013829504 Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant