CNCGLASS-Metallized-Fabric-Mesh-for-Laminated-Glass

CNCGLASS-Metallized-Fabric-Mesh-for-Laminated-Glass

These photographs show CNCGLASS metallized fabric mesh made to be combined with glass. The fabric mesh itself is a black precision weave. One face can receive a metal coat of aluminum, chromium, titanium, or gold, and that metalized face can then take a Copper or gold print, or a design prepared for the project. The metalized face in these photographs has a copper-colored sheen, consistent with the Copper finish shown in the CNCGLASS catalog. Once the fabric mesh sits in the glass, it gives the pane a distinctive visual effect and also lowers the energy that passes through the glass.

For facade units, the fabric mesh is laminated between the glass panes. For insulating glass, it is tensioned in the cavity between the two panes and fastened to the frame. The metalized face changes with the light that falls on it, which is what gives the sheen; the other face stays black and is visually quiet. From a distance of more than 3 m, the fabric mesh is not readily seen. The same fabric mesh also helps reduce bird collisions with glass. Enquiries can be sent to cnc@cncglass.com.

CNCGLASS-Metallized-Fabric-Mesh-Held-in-Hand
CNCGLASS metallized fabric mesh held in a hand, with the open weave visible through the fingers.
CNCGLASS-Metallized-Fabric-Mesh-Weave-Against-Ruler
Close view of the fabric mesh weave, shown against a metric ruler.

The next photographs show the same fabric mesh held to the light, so the open weave and the sheen on the metalized face are easier to see.

CNCGLASS-Metallized-Fabric-Mesh-Layer-Held-to-the-Light
The fabric mesh held to the light, showing how thin the layer is and how the weave remains open.
CNCGLASS-Metallized-Fabric-Mesh-Sheet-Held-Up
A sheet of CNCGLASS metallized fabric mesh held up, with a sheen on the metalized face.
CNCGLASS-Metallized-Fabric-Mesh-Weave-Close-Up
Close-up of the fabric mesh at an angle, so the open weave and the sheen on the metalized face are visible.

Published by

cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com Whatsapp: 0086 15013829504 Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant