CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Production-and-Packing

CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Production-and-Packing

This set of photographs follows CNCGLASS EVAFORCE EXTREME Super Clear EVA film through production, in-process checks, packing, and staging for shipment. The grade shown on the labels is 0.76 mm thick, 2300 mm wide, and 50 m long, with date code 62028081002.

On the production line, a tape measure is used to check the roll width; the film edge falls just past the 230 cm mark, consistent with the 2300 mm specification. A Peacock dial thickness gauge, made in Japan and graduated in 0.01 mm, is then placed on the film and reads 0.76 mm.

After winding, each roll is wrapped, labelled, and weighed — one finished roll on the packing table is shown at 88.1 kg. The rolls are sealed in protective bags, packed into long cartons marked 235 × 25 × 25 cm, and moved to the loading dock with plywood export crates and smaller cartons marked cnc@cncglass.com. Enquiries can be sent to cnc@cncglass.com.

CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Production-Label
Production-line label: CNCGLASS EVAFORCE EXTREME Super Clear EVA film, 0.76 mm × 2300 mm × 50 m, date 62028081002.
CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Grade-Label
The same Super Clear EVAFORCE EXTREME grade label, 0.76 mm × 2300 mm × 50 m, held in front of the winding rolls.

The next photographs show the width and thickness checks made on the production line.

CNCGLASS-EVA-Film-Width-Check-on-Production-Line
A tape measure is laid across a roll of EVA film on the production line to check the finished width.
CNCGLASS-EVA-Film-Width-Measured-at-2300mm
Width check: the film edge falls just past the 230 cm mark, consistent with the 2300 mm specification.
CNCGLASS-EVA-Film-Width-Check-at-Roll-Edge
Close view of the roll edge against the tape measure, just past 230 cm (2300 mm).
CNCGLASS-EVA-Film-Thickness-Check-on-Production-Line
A technician uses a Peacock dial thickness gauge to check the EVA film on the production line.
CNCGLASS-EVA-Film-Thickness-Gauge-Reading-0.76mm
The Peacock gauge, made in Japan and graduated in 0.01 mm, reads 0.76 mm on the film.

Once the film is wound, the rolls are bagged, labelled, weighed, and packed into cartons.

CNCGLASS-EVA-Film-Roll-Vacuum-Bag-Sealing
A finished roll of EVA film is sealed in a protective bag on the vacuum packing machine.
CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Roll-Labeling
The Super Clear EVAFORCE EXTREME label, 0.76 mm × 2300 mm × 50 m, is applied to the end of the wrapped roll.
CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Roll-End-Label
End label on the wrapped roll: CNCGLASS EVAFORCE EXTREME Super Clear EVA film, 0.76 mm × 2300 mm × 50 m, date 62028081002.
CNCGLASS-EVA-Film-Wrapped-Roll-at-Packing-Table
A wrapped roll of EVA film on the packing table, ready for weighing and cartoning.
CNCGLASS-EVA-Film-Wrapped-Roll-Ready-for-Packing
The wrapped roll on the stainless packing table; the scale above the table reads 88.1 kg.
CNCGLASS-EVA-Film-Roll-Weighed-at-88-1kg
The packing-table scale reads 88.1 kg for the wrapped EVA film roll below.
CNCGLASS-EVA-Film-Carton-Packed-at-Packing-Area
A packing operator tapes a long EVA FILM carton at the packing table, behind the strip curtains of the packing area.
CNCGLASS-EVA-Film-Carton-on-Packing-Table
A long carton marked EVA FILM, packed and taped, on the stainless table in the packing area.
CNCGLASS-EVAforce-Extreme-Super-Clear-EVA-Film-Carton-Label
Carton label: CNCGLASS EVAFORCE EXTREME Super Clear EVA film, 0.76 mm × 2300 mm × 50 m, carton 235 × 25 × 25 cm, date 62028081002.

The packed cartons and export crates are then staged at the loading dock.

CNCGLASS-EVA-Film-Cartons-and-Export-Crates-at-Dock
Cartons marked cnc@cncglass.com and CNC EVA, staged with plywood export crates of EVAFORCE EXTREME Super Clear film.
CNCGLASS-EVA-Film-Export-Crates-and-Cartons-Ready-for-Loading
Cartons on a pallet and stacked CNCGLASS export crates staged at the loading dock, ready for shipment.

Published by

cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com Whatsapp: 0086 15013829504 Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant