CNCGLASS-0.76-mm-Clear-EVA-Laminated-Glass-Durability-and-Light

This technical note covers a clear EVA safety laminate from CNCGLASS: two 3.90 mm clear float plies bonded with a 0.76 mm clear EVA interlayer, at a nominal thickness of 8.56 mm. High-temperature and humidity exposures to EN ISO 12543-4:2011 showed no bubbles, delamination or cloudiness. After 2000 h of radiation the relative differences in luminous transmittance on the three specimens were 0.3 %, 0.6 % and −0.2 %, with no delamination, conforming to EN ISO 12543-2:2011 point 5.3. Measured to EN 410:2011, mean luminous transmittance was 87.6 % and ultraviolet transmittance was 0.05 %. The document is a CNCGLASS performance summary, not a third-party test certificate or certificate of conformity. This technical note does not list prices. Enquiries can be sent to cnc@cncglass.com. The full note is in the PDF below.

CNCGLASS-Product-Catalog-Flow-Media

This catalog describes CNCGLASS flow media, a mesh resin-distribution medium made from polypropylene or polyethylene. In vacuum infusion it is laid into the bag stack to give the resin a low-resistance path across the mold. The mesh lays flat, resists curling, and moves resin quickly, so fill time is shortened and the amount of resin left in the mesh stays low. The media can be cut to the shape of the part, consumption is modest, and it is a practical, economical layer in VARI and other vacuum infusion work. The catalog also includes product photographs, a process schematic of a typical vacuum infusion stack, and contact details. This catalog does not list prices. Enquiries can be sent to cnc@cncglass.com. The full catalog is in the PDF below.