Today i read a good post of how to make glass laminated bullet-proof glass.
It’s very useful and clear of how to process it.
I think it’s helpful so i share it here.
All the rights is reserved by the EHOW.COM
How to Make Glass Laminated Bullet-Proof Glass
Bullet-proof glass is made from different types of plastic, including glass laminate, polycarbonate, acrylic and glass-clad polycarbonate. The thickness of the material and refining process help to determine its strength. Laminating a pane of glass with a bullet-proof material will strengthen it and make it bullet-proof.
1
Remove the glass from its frame.
2
Position the glass on mount that is perfectly level.
3
Measure the dimensions of the glass.
4
Clean the glass with a rubbing alcohol-soaked paper towel. This leaves it spotless and clean.
5
Cut a clear glass clad polycarbonate pane to the dimensions of the glass.
6
Carefully pour a liquid clear polyurethane epoxy on to the glass. It should spread smoothly and evenly. Put a drop cloth under the edges of the glass because the epoxy will spill over. Pour enough on so the entire pane is coated thoroughly.
7
Carefully place the glass-clad polycarbonate pane on top of the glass.
8
Align the edges of both panes. Let the epoxy run off. Allow the weight of the glass-clad polycarbonate to push the epoxy off.
9
please go to following link to read it.
10
please go to following link to read it.