This page covers two CNCGLASS catalogs: Teflon-coated glassfiber mesh, and silicone vacuum tubes and related accessories for glass lamination.
The mesh is offered in two grades: CNC44, a standard Teflon-coated glassfiber mesh, and CNC44S, a double-lined grade strengthened in stiffness. Maximum width is 4,000 mm × any length, available in rolls or cut to exact piece dimensions. The mesh is described as improving vacuuming performance, helping avoid valve congestion and clogging, and protecting silicone blankets from sharp glass edges during processing. It is suitable for continuous heating at 260°C or above.
The second catalog covers silicone vacuum tubing for glass-lamination vacuuming in three standard sizes: 4 mm internal / 9 mm external, 6 mm internal / 12 mm external, and 9 mm internal / 17 mm external. It also includes stainless-steel through-bag vacuum valves with a standard 1/4 NPT thread, for use from room temperature to 260°C; quick-disconnect couplings with 1/4 NPT thread that shut off airflow in both the plug and the socket when uncoupled; reinforced rubber hose in a standard green grade listed at a maximum service temperature of 230°C and a maximum pressure of 25 bar, with a 3/8 inch bore and 1/4 inch male NPT fittings, plus a higher-rated red grade; stainless-steel hose with 1/4 NPT thread; and square silicone strip for safety glazing and glass lamination vacuuming. Listed strip sizes include 1 mm × 10 mm, 10 mm × 14 mm, 18 mm × 22 mm, and 5 mm × 15 mm, with hardness 65 Shore A. The strip is listed as passing 240°C for 72 hours and −50°C for 24 hours with no damage; other sizes are available. These catalogs do not list prices. Enquiries can be sent to cnc@cncglass.com. The full catalogs are in the PDFs below.