Contact Us: cnc@cncglass.com – Page 204 – CNCGLASS EVA film & SGP interlayer

Green Tape for safety glass laminating, EVA FILM, PVB FILM, SGP FILM

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

GREEN TAPE is to perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating(the GREEN TAPE is High temperature resistance).
003 Green Tape Preventing Melt Eva Film Over Flowing Out of Laminated Glass Edges

What is the specifications of CNC GREEN TAPE?
25mm*66M/roll
30mm*66M/roll
35mm*66M/roll
40mm*66M/roll
50mm*66M/roll

If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, will the GREEN TAPE prevent the de-airing vacuuming? do we need to make some holes on the CNC

GREEN TAPE for vacuuming the air out?

It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don’t need to make holes on the CNC GREEN TAPE, so you can get the cleaner result of the edges of the

final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it’s better you make some holes on the CNC GREEN TAPE to help pre-laminated glass

vacuuming.

Does CNC GREEN TPAE leave glues on the glass?
NO! No left remains of CNC GREEN TAPE on glass surface after peeling off. CNC GREEN TPAE can stand continuously heating more than 180℃with strong tear resistance.

CNC Glass Interlayer
www.cncglass.com www.c-n-c.com
[email protected] [email protected]
Product 1]Super Clear EVA Film for safety laminated glass
Product 2]Milky White EVA Film for safety laminated glass
Product 3]Green Tape and Thermal Cleaning Cutter for EVA film safety laminated glass glazing

Ethylene Vinyl Acetate EVA interlayer film for laminated glass, packing, loading container

Three Terminologies of Glass Laminating EVA Ethylene Vinyl Acetate Interlayer Film

By Peter Lin

1.
Cross-links Reaction:

Simply Speaking:
Cross-links Reaction is the key for the tensile strength, impact resistance, penetration resistance, and the thermoset properties of Glass Laminating EVA Ethylene Vinyl Acetate Interlayer Film.

Professional Introduction:
Cross-links are bonds that link one polymer chain to another. They can be covalent bonds or ionic bonds. When the term “cross-linking” is used in the synthetic polymer science field, it usually refers to the use of cross-links to promote a difference in the polymers’ physical properties. (info from wikipedia.org)

2.
Coupling Reaction:
Simply Speaking:
Coupling Reaction is the key for the adhesive strength between glass surface( metal surface, polymer sheet) and EVA Interlayer Film.

Professional Introduction:
A coupling reaction in organic chemistry is a catch-all term for a variety of reactions where two hydrocarbon fragments are coupled with the aid of a metal catalyst. In one important reaction type a main group organometallic compound of the type RM (R = organic fragment, M = main group centre) reacts with an organic halide of the type R’X with formation of a new carbon-carbon bond in the product R-R’ [1] (info from wikipedia.org)

3.
Polymer Mixing :

Simply Speaking:
Polymer Mixing is the procedure and formula of producing glass laminating EVA Ethylene Vinyl Acetate interlayer film.

Professional Introduction:
Mixing is important in to create new material properties, processability and cost-saving. Polymers are blended with other polymers to combine their properties and sometimes to even synergistically increase their physical characteristics. Various additives and reinforcing agents are mixed with polymers to improve mechanical performance and impart specific properties to the mixture.